Nibsburner Pyrography Specialty Tip Styles - Pyrography Pens for Special Use Burning
Nibsburner Pyrography Tip styles for Specialty Use
Nibsburner pyrography pens showN here are special use pens like the Awl, Square shader/calligraphy and the new Long writing tip which can cut into gourds.
NOTE: Nibsburner pens are compatible with all Colwood, Everglades and Optima wood burning systems without having to use an adaptor.
Special Order on Pens/Tips I Don't Carry
I am no longer taking special orders on Nibsburner products that I do not carry in stock. If there is something you want and it's not listed on my site I suggest you contact Nibsburner directly.
Nibsburner's Warranty
Please refer to the main Nibsburner page for warranty information.
Is your fixed-tip broken?
It doesn't matter if your tip is out of warranty, it can be fixed or replaced. For information on getting your tip fixed or replace click here
Using Nibsburner Pens On Other Units or Visa Versa:
The photo below shows the Nibsburner Fixed-tip Pen. Their connection is different than Razertip and Detailmaster so be sure you have a compatible cord if you are using Nibsburner pens on one of these wood burning systems or if you are using a Razertip or Detailmaster pen on a Nibsburner wood burning system. You will also need a different cord to use a Nibsburner pen on Detailmaster power units. A compatible cord for use with Detailmaster or Razertip burners is available on the Nibsburner main page.
Nibsburner offers 4 different styles of wood burning Pen, depending on the type of burn wanted but because the fixed-tip Pens are more sturdy and provide the best strength and performance I personally use, recommend and sell fixed-tip Pen. All Nibsburner's pen's are vented to allow internal air flow for cooler wood burning, and have a comfortable cork finger grip.
NOTICE ABOUT PHOTOS ON THIS PAGE:
Each photo on this page was taken by Nedra Denison who owns the copyright to each of these photos. These photos my not be copied, or in any way be altered without written permission. These photos are protected by the law.
Excess Shipping Charges on Small Items
Unfortunately I cannot customize the shipping, handling and insurance charges to accommodate small, lightweight items such as woodburning pens, cords, etc. Please Check out my shipping policy for information on refunds for excess shipping and handling.
In the past I have been doing manual invoices for people but it has become very time consuming on both ends so I am asking you to go ahead and order online. Once I process the order and shipping I will refund any excess charges through pay pal.
|
Suggested Retail Price for Fixed Tip Handpieces LOWEST PRICES ANYWHERE: F = Fixed-Tip Standard Pen $22.95 $21.00 |
Note: Certain specialty pens are priced differently from those shown at left. Prices on specialty pens will be listed with each item. |
DON'T FORGET TO BUY SOMETHING TO CLEAN YOUR PEN TIPS
Regular cleaning of your pens is essential to your burning and ensuring the life of your pens. Look for the Razertip tip cleaner or the strop and aluminum oxide found on the Nibsburner main page
Fixed-Tip Handpieces
|
These have the pen tip and handle permanently attached. They are more stable and provide the best heat distribution. Just plug it into the cord and you're ready to go. These pens are all hand made and the tips are all highly polished. NEW LOWER PRICES! RETAIL PRICE: $22.95 OUR PRICE: $21.00 |
||
| Item | Description |
Order |
|---|---|---|
 |
#NBFAWLR - Awl Round Same as above but round. This is similar to the #4 writing tip but it has a finer tip much like a fine-tipped pen. Great for writing, signatures, pointillism and so much more. ONLY 4 LEFT IN STOCK |
|
 |
#NBFFSQ - Square Shader/Calligraphy, Sm (3/32") This shader has a slight curve, giving it greater access to corners where round tip shaders cannot reach. The square end shaders come in three sizes: Small, Medium and Large. They also work well for calligraphy. |
|
 |
#NBFSQ - Square Shader, Med (7/32") Same as above but larger ONLY 6 LEFT IN STOCK |
|
 |
#NBF4-L - Gourd Poker/Long Writer This is a new tip Nibsburner made to my specifications. It is the same as the HD9P-L made for me by Razertip. It is very similar to the standard writing tip, but with a longer tip (3/4"). This is great for making holes in gourds and wood but of course can be used for writing, pointillism and other things as well. I found this is a great tool to make holes for lacing, embellishments, inserting feathers into a gourd mask and so many other uses. It is easier to use than making sawdust with a drill and it works like a charm. It is also good for making delicate cuts in the gourds. Use this with a gentle sawing action. ONLY 6 LEFT IN STOCK |
|
Pyrography Pen Holder
Nedra had been asking Alan to make her a pen holder to organize her wood burning pens for quite some time. Together they tested out several designs until they came up with just the right design that was efficient, didn't take up much space and easy to see the pens!
The holder accommodates up to 10 pens in their plastic storage tube. They are hand made by Alan out of solid wood (maple, birch and cherry) and sealed with a protective finish.
The pen holders are now available in my Pyrography Supplies Page
